Saving
7. ENERGY SAVING
7.1 ENERGY SAVE
7.1.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the
timers are at the default settings. If the timers are changed, then the energy saved will be different.
For example, if the timer is set to 240 min., the grey area will disappear, and no energy is saved
before 240 min. expires.
Timer Settings
Sleep Mode Timer
After a specified period has passed, or the [Energy Saver] key is pressed, the machine enters
Sleep Mode in order to conserve energy.
Specify the time to elapse before Sleep Mode.
You can specify this setting only if [Sleep Mode] is set to [Enable] in [Administrator Tools] in
[System Settings].
Default: [1 minute]
The time can be set from 10 seconds to 240 minutes, using the number keys.
Sleep Mode Timer may not work when error messages appear.
Depending on which Embedded Software Architecture application is installed on it, the machine
might take longer than indicated to enter Sleep Mode.
To Next Page
Loading...
Need help?
General
