If reception is poor, you may need to move the machine:
 Make sure that the machine is not located near an appliance or any type of equipment that
could generate a strong magnetic field.
 Position the machine as close as possible to the access point.
SP Mode Settings for IEEE 802.11a/g Wireless LAN
The following SP commands can be set for IEEE 802.11a/g
SP No. Name Function
5840 004 SSID Used to confirm the current SSID setting.
5840 006 Channel MAX
Sets the maximum range of the channel settings for
the country.
5840 007 Channel MIN
Sets the minimum range of the channel settings
allowed for your country.
5840 011 WEP Key Select Used to select the WEP key (Default: 00).
2.6.3 IEEE 1284 INSTALLATION
 Unplug the machine power cord before starting the following procedure.
Accessories
Check the accessories and their quantities against the table below.
No. Description Q'ty
1 IEEE1284 Interface Ass'y 1
2 UL Sheet 1
3 Caution Sheet 1
To Next Page
Loading...
Need help?
General
