1.5ENTIRELY BLANK COPY
Is the used paper moist?
No Yes
Replace the paper.
Are the terminals of the charge corona unit and the T& S corona unit connected properly?
Yes No
Set the terminals properly.
Is the charge corona wire or the T & S corona wire broken?
No Yes
Replace the broken part.
Are the charge corona and transfer corona applied?
Yes No
Check the main board, charge/bias/grid power pack, and T & S power pack.
Does leakage occur in the T & S endblocks?
No Yes
Replace the defective parts.
Are the development drive gears broken?
No Yes
Replace the broken gears.
Check the drum drive mechanism.
SM 6-5 A163
To Next Page
Loading...
Need help?
General