7. REPLACEMENT AND ADJUSTMENT
7.1EXTERIOR COVER REMOVAL
7.1.1Front Cover Removal
1. Remove the front cover [A] (2 screws).
NOTE:If the screw holes for the front cover become worn by the screws,
extra holes are provided next to the original screw holes.
7.1.2Left and Right Cover
NOTE:Be careful not to drop and damage the lower front cover [B].
1. Remove the left and right covers [C and D] (3 screws each).
NOTE:When reattaching the left and/or right covers, unlock and lift the
cutter unit for easier assembly.
[A]
[C]
[C]
[B]
SM 7-17 A163
To Next Page
Loading...
Need help?
General