MECHANICAL OPERATION
B435/B436 7-6 SM
2.1.4 CUTTER OPERATION
The cutter unit uses a sliding rotary cutting blade [A] which is pulled past a fixed
blade by a drive wire. The rotary cutting blade allows the cutter unit to cut paper in
both directions. There are home position switches [B] at both ends of the cutter.
The cutter motor turns off, stopping the cutting action, when the rotary cutting blade
knob plate [C] turns off one of these switches.
B436D104.WMF
[A]
[B]
[C]
To Next Page
Loading...
Need help?
General