SPECIFICATIONS
B047/B048 1-2 SM
Self-diagnostic Codes: 16 codes, displayed on the copy counter
Power Source: 115 V/60 Hz, 12 A
220 ~ 240V/50, 60 Hz, 7A
Power Consumption: Maximum: 1.4 kW
Warm-up: 1.3 kW
Ready: 0.04 to 1.3 kW
Copy cycle: 1.4 kW
Dimensions (W x D x H): B047: 1,080 x 570 x 490 mm
42.5" x 22.4" x 19.3"
B048: 1,080 x 623 x 480 mm
42.5" x 24.5" x 18.9"
Weight: B047: 79 kg, 174.0 lbs
B048: 80 kg, 176.0 lbs
Optional Equipment and Machine Configuration
Configuration
Main frame Optional equipment
Additional equipment
Roll feeder (B435: 1 roll, B436: 2 rolls) —
Roll cutting rail (B437) —
Table (B439) —
B047 copier
Side guides (B438) —
Roll feeder (B435: 1 roll, B436: 2 rolls) Copy tray (B440)
B048 copier
Side guide (B438) —
NOTE: 1) Roll cutting rail cannot be installed on the B048 copier.
2) Key counters cannot be installed on these copiers.
3) The B048 requires a roll feeder (either 1 roll or 2 rolls). While the roll
feeders are shipped separately, they are not really optional. One must
be installed for the B048 to function properly. .
Other Optional Equipment
• Roll Holder Unit (B394)
• Drum anti-condensation heater
Specifications are subject to change without notice.
To Next Page
Loading...
Need help?
General