3. Enter the length of the original with the number keys, and then press [ ].
You can enter sizes between 1 to 999 mm (0.1 to 99.9 inches) in increments of 1 mm (0.1 inch).
4. Enter the length of the copy with the number keys, and then press [ ].
5. Press [OK] twice.
• To change the value you entered, press the key you want to change, and then enter a new value.
Directional Magnification (%)
Specify the horizontal and vertical reproduction ratios, individually.
Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically.
a: Horizontal ratio
b: Vertical ratio
Specifying the ratio with [
] and [ ]
Specify a ratio using [ ] and [ ].
Advanced Reduce / Enlarge Copying
157
To Next Page
Loading...
Need help?
General
