Non-compatible originals for the Auto Document Feeder
Placing unsuitable originals in the ADF can cause paper misfeeds or black lines, or result in damage to the
originals.
Place the following types of originals on the exposure glass instead.
• Originals other than those specified on “Sizes and Weights of Recommended Originals”
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon paper,
or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin or highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are still wet with ink or correction fluid
• The original might become dirty if it is written with a pencil or a similar tool.
Sizes Detectable with Auto Paper Select
This section describes sizes detectable by the exposure glass and ADF.
Metric version
Size
A3
B4 JIS
*1
A4 B5 JIS
A5 A5 11×17
Original
location
Exposure
glass
×
*2
×
ADF
1. Placing Originals
30
To Next Page
Loading...
Need help?
General
