6. Specify the creep value with [ ] and [ ].
7. Press [OK] twice.
• You can adjust the creep value between 0 to 99 mm (0 to 3.9 inches) in 1 mm (0.1 inch) steps.
• To change the value you entered, press [ ] and [ ], and then specify a new value.
Mix 1 & 2 Sided
You can copy two types of originals, 1-sided and 2-sided, onto one or both sides of a sheet in one copy
job.
4. Advanced Copying
212
To Next Page
Loading...
Need help?
General
