User Tools Menu (Copier / Document Server
Features)
This section describes items that can be specified on the Copier/Document Server Features screen. The
Copier/Document Server Features screen can be displayed by pressing the [User Tools] key. For details
about how to set up these items, see General Settings Guide.
General Features
Item Description
Auto Image Density
Priority
You can set whether Auto Image Density is “On” or “Off” when the
machine is turned on, reset, or modes are cleared.
Original Type Priority You can select the original type effective when the power is turned on,
or modes cleared.
Original Photo Type
Priority
When you select “Text / Photo” or “Photo” in “Original Type Priority”,
you can change the settings of the selected original type.
Original Orientation in
Duplex Mode
Set the original orientation when making two-sided copies.
Copy Orientation in
Duplex Mode
Set the copy orientation when making two-sided copies.
Reserve Job Mode You can set whether to reset the mode to the initial state or return to
the mode in use before the reserved operation was started when you
return to the initial screen after reserved copying finishes.
Reservation Screen Auto-
off Timer
You can set the time required until the display is switched to the
reserved first job display after reservation is set.
Max. Copy Quantity The maximum copy quantity can be set between 1 and 9999.
Manual Original Counter
Reset
You can set whether to enable the document counter reset key.
Auto Tray Switching If you load paper of the same size in two or more trays, the machine
automatically shifts to the other when the first tray runs out of paper
(when Auto Paper Select is selected.) This function is called “Auto Tray
Switching”. This setting specifies whether to use Auto Tray Switching
or not.
Dark Background You can set whether “Dark Background” can be selected as an
original type.
User Tools Menu (Copier / Document Server Features)
265
To Next Page
Loading...
Need help?
General
