• Place special originals, such as translucent paper, one by one.
1. Press [Special Original].
2. Select [Batch] and then press [OK].
3. Place the first part of the original, and then press the [Start] key.
4. After the first part of the original has been fed, place the next part, and then press the [Start]
key.
• To copy subsequent originals in this mode, repeat step 4.
• Press the [ ] key after all originals have been scanned.
SADF Mode
In SADF mode, even when an original is placed page by page in the ADF, each page is automatically fed
when placed.
1. Press [Special Original].
2. Press [SADF] and then press [OK].
3. Place one page of an original, and then press the [Start] key.
1. Placing Originals
40
To Next Page
Loading...
Need help?
General
