• When you place a thick book or three-dimensional original on the exposure glass and lower the ADF,
the back side of the ADF rises up to accommodate the original. Keep your hands away from the hinges
at the back of the ADF when you close it.
• You can specify the way in which copies are delivered when copying an original placed on the
exposure glass under Copy Eject Face Method in Glass Mode in User Tools. For details, see “Copier/
Document Server Features”, General Settings Guide.
Placing Originals in the Auto Document Feeder
Place originals in the ADF.
Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect the
size of the original incorrectly or display a paper misfeed message. Also, be sure not to place originals or
other objects on the top cover. Doing so may cause a malfunction.
Settings should be made in the following situations:
When placing originals consisting of more than 100 pages:
See “Batch Mode”.
When placing originals one by one:
See “SADF Mode”.
When copying originals of various sizes:
See “Mixed Sizes Mode”.
When copying thin paper originals:
See “Thin Paper Mode”.
When placing custom size originals:
See “Custom sizes”.
1. Adjust the document guide to the original size.
1. Placing Originals
38
To Next Page
Loading...
Need help?
General
