1. Placing Originals
This chapter describes the types of originals you can set and how to place originals.
Originals
This section describes the types of originals that can be placed, paper sizes that are automatically detected,
and missing image area.
• As the color of markers or highlighters is difficult to reproduce, the copy might not come out depending
on the color or a different color might be copied.
Sizes and Weights of Recommended Originals
The following describes recommended paper sizes and non-recommended originals:
Metric version
Original location Original size Original weight
Exposure glass Up to A3
ADF One-sided originals: A3 A5 52 128 g/m
2
Two-sided originals: A3 A5 52 105 g/m
2
Thin Paper mode: A3 A5 40 128 g/m
2
Inch version
Original location Original size Original weight
Exposure glass Up to 11 × 17
ADF One-sided originals: 11 × 17 5
1
/
2
× 8
1
/
2
14 34 lb. Bond
Two-sided originals: 11 × 17 5
1
/
2
× 8
1
/
2
14 28 lb. Bond
Thin Paper mode: 11 × 17 5
1
/
2
× 8
1
/
2
11 34 lb. Bond
• About 100 originals can be placed in the ADF.
29
To Next Page
Loading...
Need help?
General
