1. Press [Dup./ Combine/ Series].
2. Press [Series].
3. Select [2 Sided 1 Sided] or [Book 1 Sided], and then press [OK].
If you specified [2 Sided 1 Sided], you can specify the orientation.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• You can select the orientation of originals and copies. For details, see “Originals and Copy
Orientation”.
• p.80 "Originals and Copy Orientation"
Booklet/Magazine
Copies two or more originals in page order.
The following table shows the paper sizes for Book 2 Sided when the reproduction ratio is 100%:
4. Advanced Copying
206
To Next Page
Loading...
Need help?
General
