1. Select the Stack function ( ) under Sort / Stack.
If you want to output copies to the stacker, select the tray under Stacker Output Tray.
2. Enter the number of copies with the number keys.
3. Place the originals, and then press the [Start] key.
• When placing an original on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using the Batch mode, press the [ ] key
after all the originals have been scanned.
• To output copies to the stacker, you must first specify Stacker Output Tray under Input / Output in
User Tools. For details, see “Copier/Document Server Features”, General Settings Guide.
Staple
Each copy set can be stapled together.
• If you select staple without having the stapler cartridge for saddle stitch set in the booklet finisher, a
paper misfeed might occur. Be sure to set the stapler cartridge.
Finishing
95
To Next Page
Loading...
Need help?
General
