Roland EGX-350 User Manual

3-1 Types of Emergency Stops to Ensure Safety
How to Perform an Emergency Stop
Press the Emergency Stop button.
Operation stops immediately.
To Cancel an Emergency Stop
Procedure

Switch off the power switch.

Turn the button in the direction of the
arrows.
Emergency
Stop button
Emergency
Stop button
OFF
Chapter 3 Basic Operation
38

Roland EGX-350 Specifications

General

Drive System	Stepper motor
Interface	USB
Engraving Area	350 x 300 mm
Engraving Area (mm)	300 x 210 mm
Software Resolution (mm)	0.01 mm/step
Spindle Speed	7, 000 rpm
Power Supply	AC 100 - 240 V, 50/60 Hz
Acoustic Noise	65 dB (A) or less (when not cutting)
Operating Temperature	5 - 40 °C
Operating Humidity	35 to 80% (no condensation)
External Dimensions (mm)	680 x 580 x 430