Roland EGX-350 User Manual

Adjusting the Spindle Speed
To adjust the speed of spindle rotation,
turn
on the handy panel.
The setting for the spindle speed can be made
only on the machine. Any setting made on the
computer is ignored.
Slow Fast
Spindle speed
48
Chapter 3 Basic Operation
3-5 Spindle Operation

Roland EGX-350 Specifications

General

Drive System	Stepper motor
Interface	USB
Engraving Area	350 x 300 mm
Engraving Area (mm)	300 x 210 mm
Software Resolution (mm)	0.01 mm/step
Spindle Speed	7, 000 rpm
Power Supply	AC 100 - 240 V, 50/60 Hz
Acoustic Noise	65 dB (A) or less (when not cutting)
Operating Temperature	5 - 40 °C
Operating Humidity	35 to 80% (no condensation)
External Dimensions (mm)	680 x 580 x 430