Roland EGX-350 User Manual

Chapter 4 Engraving
52
4-1 Flow of Engraving Operations
1.
Startup
Switch on the power switch to start the machine.
 P. 40, “How to Start the Machine”
2.
Mounting the Workpiece
Mount the workpiece to engrave on the table.
 P. 54, “Mounting a Workpiece”
ON
To next page

Roland EGX-350 Specifications

General

Drive System	Stepper motor
Interface	USB
Engraving Area	350 x 300 mm
Engraving Area (mm)	300 x 210 mm
Software Resolution (mm)	0.01 mm/step
Spindle Speed	7, 000 rpm
Power Supply	AC 100 - 240 V, 50/60 Hz
Acoustic Noise	65 dB (A) or less (when not cutting)
Operating Temperature	5 - 40 °C
Operating Humidity	35 to 80% (no condensation)
External Dimensions (mm)	680 x 580 x 430