Ruijie Reyee RG-RAP Series User Manual

Web-based Configuration Guide Network Settings
130
alone, and thus the master AP/AC delivers configurations to edit the network settings in
a unified manner.
4.2 Configuring Internet Connection Type (IPv4)
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models: In Local Device mode, choose Network > WAN > WAN
For other RAP models: Choose ( WLAN > APs > Manage >) Network > WAN >
WAN
Select the Internet connection type after confirming with the ISP. For detailed
configuration, see Work Mode. After completing the configuration, click Save.
The device supports the following Internet connection types:
 PPPoE: This Internet connection type is supported only when the device works in
routing mode. You need to manually configure the PPPoE username and password.
 DHCP: The current device will act as a DHCP client and apply for the IPv4
address/prefix from the upstream network device.
 Static IP: If this Internet connection type is selected, you need to manually configure a

Ruijie Reyee RG-RAP Series Specifications

General

Brand	Ruijie
Model	Reyee RG-RAP Series
Category	Wireless Access Point
Language	English