Web-based Configuration Guide Network Settings
147
4.15 Configuring ARP Binding
Caution
This function is not supported when the device works in AP mode.
The device learns the IP and MAC addresses of network devices connected to ports of the
device and generates ARP entries. You can bind ARP mappings to improve network
security.
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models: In Local Device mode, choose Security > ARP List
For other RAP models: Choose ( WLAN > APs > Manage >) Security > ARP List
ARP mappings can be bound in two ways:
(1) Select a dynamic ARP entry in the ARP list and click Bind. You can select multiple
entries to be bound at one time and click Bind Selected to bind them. To remove the
binding between a static IP address and a MAC address, click Delete in the Action
column.
To Next Page
Loading...
Need help?
General
