Web-based Configuration Guide Wi-Fi Network Settings
41
3 Wi-Fi Network Settings
Note
Wi-Fi network settings covers the Wi-Fi settings of the currently logged in devices and the
management of all wireless devices in the network. In Network mode, the Wi-Fi network
settings are synchronized to all wireless devices in the network. You can configure device
groups to limit the synchronization range. For details, see Configuring AP Groups.
3.1 Configuring AP Groups
3.1.1 Overview
After the self-organizing network is enabled, the device can act as the master AP/AC to
perform batch configuration and management on the downlink APs in groups. Group the
APs before the configurations are delivered.
Note
If you specify a group when setting up a wireless network, the corresponding
configuration will take effect on the wireless devices in the specified group.
3.1.2 Procedures
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models: In Network mode, choose Devices > AP
For other RAP models, choose WLAN > APs
(1) View the information of all APs in the current network, including the basic information,
RF information and models. You can click SN to configure the device.
To Next Page
Loading...
Need help?
General
