Web-based Configuration Guide System Settings
163
If no operation is performed on the Web page within a period of time, the session is
automatically disconnected. When you need to perform operations again, enter the
password to log in again. The default timeout duration is 3600 seconds, that is, 1 hour.
5.5 Setting and Displaying System Time
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models:
If the device works in self-organizing network mode, and Network mode webpage is
displayed, choose System > System Time
In standalone mode: Choose System > System Time
For other RAP models:
In self-organizing network mode: Choose Network > Time
In standalone mode: Choose System > System Time
You can view the current system time. If the time is incorrect, check and select the local
time zone. If the time zone is correct but time is still incorrect, click Edit to manually set
the time. In addition, the device supports Network Time Protocol (NTP) servers. By
default, multiple servers serve as the backup of each other. You can add or delete the
local server.
Caution
In self-organizing network mode, the system time of all devices in the network will be
changed synchronously.
To Next Page
Loading...
Need help?
General
