104 •
Program Mode Sam4POS 6600/4800II Program Manual v2.1
5. Press OK or the Done key on the keypad to enter the tare.
Function Key
Function Key Programming is separated into three categories, Function Key, Tender Key
and MACRO Key. The options for each vary by key type selected. Refer to the
Function/Tender Key List for specific information about each key type.
MACRO’s can be programmed to perform a predefined set of functions/operations. We
can create as many functions/tenders and MACRO’s as are needed. Custom key
descriptors up to 30 characters can be programmed on the keys.
MLU and FLU editing can also be accessed from the Function Key/Tender Key programming.
1. Select FUNCTION KEY from the PROGRAM MODE menu to display the FUNCTION
KEY, TENDER KEY selection screen.
2. The function key selection menu appears; select the program area you wish to edit.
Function Key / Tender Key
1. From the Function Key programming selection menu, select Function Key or Tender key from the
available selections.
To Next Page
Loading...
Need help?
General
