Sam4s SAP-6600 Manual

255 •
Sam4POS 6600/4800II Program Manual v2.1
3. Parameter Download This procedure is explained on page 275 in this supplement. This operation
loads the parameters for the Pin-Pad.
Backup Program
It is a good practice to back up the program data from the ECR after all the programming is
completed and the equipment tested for proper operation.
The database menu, in the program mode system menu selections, provides access to the database
backup operations for the current program files. The DATABASE BACKUP backs up the database
configuration data and all sales data.
Database Backup
1. From the PROGRAM MODE, touch SYSTEM, then select DATABASE. The Database Backup &
Restore screen displays.
2. Press the DATABASE BACKUP to open the DATABASE BACKUP dialog.
3. Select the device you wish to back up to. PATH selections are: USB, Internal SD Card, External SD
Card.
4. Press OK to back up the current database.
5. When the backup has completed, the confirmation, ‘Database Backup Success’ displays briefly.

Sam4s SAP-6600 Specifications

General

Brand	Sam4s
Model	SAP-6600
Category	Monitor
Language	English