Sam4s SAP-6600 Manual

184 •
Program Mode Sam4POS 6600/4800II Program Manual v2.1
General
DEVICE MODEL
SAM4S 3 Inch, 2 Inch,
EPSON TMT88III, EPSON TM-U220, TMT88II SNBC
BTP-L520
COMMUNICATION TYPE
Serial, Ethernet
Serial
COM PORT
COM1 thru COM4
BAUD RATE
1200, 2400, 9600, 19200, 38400, 57600, 115200
DATA BITS
7 or 8
PARITY
NONE, EVEN, ODD
STOP BITS
1 or 2
FLOW CONTROL
NONE, XON_XOFF (S/W), RTS_CTS (H/W)
Print
PAPER CUTTING AFTER PRINTING
Check if you want to the printer to cut after printing. This flag can also be used to send a signal to a
beeper connected the printer.
FEEDING LINES AFTER PRINTING
Up to a 2-digit entry is allowed (0-99).
Scanner
Serial scanners can be used with the SAM4POS terminal, program the port setting to match the scanner settings,
Alternately, a USB scanner can be connected to the terminal; a USB scanner would require no port
programming, simply plug in the USB scanner.
General
DEVICE MODEL
General Scanner
COMMUNICATION TYPE
Serial
Serial
COM PORT
COM1 thru COM4
BAUD RATE
1200, 2400, 9600, 19200, 38400, 57600, 115200
DATA BITS
7 or 8

Sam4s SAP-6600 Specifications

General

Brand	Sam4s
Model	SAP-6600
Category	Monitor
Language	English