SIMOTICS M-1FE2 built-in motors
Hardware Installation Manual, 04/2020, A5E50074509B AA
185
Decommissioning and disposal
11.1 Safety instructions
Removing the motor from the machine
Danger to life caused by falling machine parts
The machine partially comprises heavy individual components. When removing the
machine, these components can fall. This can result in death, serious injury or material
damage.
• Secure the machine components that are being released so that they cannot fall.
Injury as a result of suspended loads
When being dismantled and transported, the motor can cause injury as a result of its
movement.
• Only use perfectly functioning hoisting and load suspension equipment dimensioned to
carry the motor load.
• Pay careful attention to possible movement when the motor is released.
• Do not stand under suspended loads or in their slewing range.
• When placing down the motor, ensure that it cannot roll.
Injuries caused by liquids when draining and environmental pollution
When draining, liquids can cause injuries, such as burns, chemical burns, irritation. Spilt oil
can make floor surfaces slippery and pollute the environment.
• Allow the liquid to cool down.
• Use a sufficiently large collection container.
• Avoid liquids coming into contact with the skin. Use suitable personnel protection
equipment, e.g. protective eyewear, gloves.
• Have materials on hand to soak up leaked liquids and prevent areas from being
slippery.
To Next Page
Loading...
Need help?
General