SIMOTICS M-1FE2 built-in motors
Hardware Installation Manual, 04/2020, A5E50074509B AA
87
6.1 Safety instructions
The following safety instructions on permanent magnets and permanent magnetic fields
apply only to synchronous motors.
Safety measures for electromagnetic and permanent-magnetic fields
Note
Only qualified, suitably trained personnel who clearly understand the special hazards
involved may work wi
th and on permanent-magnet rotor cores.
Note
Apply safety marking in accordance with the country
-specific regulations at the assembly
rotor cores.
● Observe the relevant nationally applicable health and safety regulations.
● Take measures, e.g. using shields, to reduce electromagnetic fields at their source.
● Keep the motor components in their original packaging until installation.
● Mark the storage location with the symbol for magnetic danger.
● Place the unpacked rotor core in a safe place. Secure the rotor core with non-magnetic
devices.
● Avoid contact of the rotor core with ferromagnetic bodies.
● Preferably use tools made of non-magnetic materials. Ferromagnetic assembly tools
must have low mass. Work carefully!
Attaching warning signs
Any danger areas encountered during normal operation, maintenance, and servicing must
be identified by well visible warning and prohibition signs (pictograms) in the immediate
vicinity of the danger.
The associated texts must be provided in the language of the country in which the product is
used.
To Next Page
Loading...
Need help?
General