SIMOTICS M-1FE2 built-in motors
Hardware Installation Manual, 04/2020, A5E50074509B AA
21
3.1 Correct and intended use
Danger to life and material damage when incorrectly used
If you do not use the motors correctly, there is a risk of death, severe injury and/or material
damage.
• Only use the motors for their intended purpose.
• Make sure that the conditions at the location of use comply with all the rating plate data.
• Make sure that the conditions at the location of use comply with the conditions specified
in this documentation. When necessary, take into account deviations regarding
approvals or country-specific regulations.
Danger to life caused by magnetic and electrical fields to persons with active implants
Electric motors represent a danger for people with active implants who come close to the
motors.
• If you are an affected person, maintain a minimum separation of 500 mm to motors.
If you wish to use special versions and design variants whose specifications vary from the
motors described in this document, then contact your local Siemens office.
If you have any questions regarding the intended usage, please contact your local Siemens
office.
Built-in motors are components for installation in machines and for deployment in industrial
or commercial plants.
Any other use of the motor is considered to be incorrect usage.
The observance of the specifications contained in the installation instructions and the
configuration manual is part of the intended purpose.
● Observe the data on the rating plate (type plate).
Conditions at the location of use must comply with the specifications on the rating plate.
The motor is designed for operation in sheltered areas under normal climatic conditions,
such as those found on shop floors.
The motor is not permitted to be operated in explosion-endangered areas.
1FE2 motors are only certified for frequency converter operation.
To Next Page
Loading...
Need help?
General