Description
3.1 Correct and intended use
SIMOTICS M-1FE2 built-in motors
22 Hardware Installation Manual, 04/2020, A5E50074509B AA
Motor applications
The 1FE2 built-in motors have been developed for directly-driven motor spindles.
The installation of the rotor and the stator by the spindle manufacturer results in a motor
spindle unit.
Danger to life through the use of an incomplete machine
If you use a machine that does not conform to the 2006/42/EU decree, there is the danger
of death, severe injury and/or material damage.
• Commission the machine only when it conforms to the regulations of the EU
2006/42/EU machine decree and the conformity has been declared.
To Next Page
Loading...
Need help?
General