User Manual 7 Web Main Interface
7.9.2.4 One-click Migration
This function is used to back up and export some critical configuration files to the local
system. It is also used to import local configuration files to the system, so as to keep its
running characteristics consistent with local configuration.
step 1 Click System > System Maintenance.
step 2 Click One-click Migration, and in the pop-up One-click Migration window, select Import or
Export, according to your actual needs.
table 7-5 Parameters description
Parameters Description
Export
Back up the system configuration files and save them locally.
You need to set a password for the zipped file when exporting.
The password should meet the relevant requirements.
Import
Import local configuration files to the system.
You need to enter the password for unzipping the file when
importing, which is the one you set when exporting the file.
- - End
7.9.2.5 Reset All Settings
After restoring to the factory settings, when logging back into the web interface,
users will be prompted to choose whether to enable network security mode.
step 1 Click System > System Maintenance to enter the corresponding page.
step 2 Click Reset All Settings to enter the Reset All Settings page.
step 3 A warning window will pop up, and click Confirm to continue the reset all settings operation.
- - End
Restoring the factory settings refers to restoring all modified settings to the factory
state and will not clear the data.
59
To Next Page
Loading...
Need help?
General
