7 Web Main Interface User Manual
7.9.2.6 Attribute Management
step 1 Click System > System Maintenance to enter the corresponding page.
step 2 Click Attribute Management.
step 3
In the pop-up dialog, select Array Mode.
table 7-6 Parameter description
Array Mode Description
Conventional Mode The array is involved in dispatching.
Sample Machine Mode The array is not involved in dispatching.
step 4 Click Confirm.
- - End
7.9.2.7 HTTPS Certificate Import
Prerequisites
step 1 Click System > System Maintenance.
step 2 Click HTTPS Certificate Import.
step 3 In the pop-up dialog, click to select Certificate File with a .crt extension, and Private Key
File with a .key extension.
step 4 Click Confirm. Once the files are imported successfully, there will be a prompt about whether to
restart the system.
- - End
7.9.2.8 Network Security Mode Configuration
Once network security mode is enabled, the web interface will automatically disable certain
ports and display a risk message when attempting to enable them.
step 1 Click System > System Maintenance.
step 2 Click Network Security Mode Configuration.
step 3 In the pop-up dialog, choose whether to enable Network Security Mode Configuration.
step 4 Click Confirm, and the page will prompt you that the changes will take effect after a restart.
- - End
7.9.2.9 Import Public Key
To ensure the security of system upgrades and verify the authenticity and integrity of
upgrade package files, a digital signature technology is employed to perform verification.
60
To Next Page
Loading...
Need help?
General
