User Manual 8 Grid Dispatching Function
Parameters Description
Error Limit**
Adjust accuracy. If the ratio of the difference between the active
power and the target value to the rated power is within the set
error range, the target value is reached.
Adjustment Ratio**
If the adjustment does not reach the set target value, increase or
decrease adjustment value according to the set adjustment ratio,
so as to reach the target value.
The parameters noted with * refer to the parameters that need to be set only when Control
Method is set to Closed-Loop Control.
The parameters noted with ** refer to the parameters that need to be set only when Control
Method is set to Closed-Loop Control, and a Smart Energy Meter or transformer is selected.
step 4 After finishing parameter setting, click Save to save the operation.
- - End
8.2.1.3 Local Power Control
If reactive dispatching command or dispatching target value is used as dispatching input
locally, set Active Control Mode to Local Power Control.
step 1 Click Power Control > Active Power to enter the Active Power page.
step 2 Set Active Control Mode to Local Power Control.
75
To Next Page
Loading...
Need help?
General
