Tektronix DPO77002SX User Manual

Starting and stopping an acquisition
After the channels that you want to acquire are selected, use the following procedure.
1. To start the acquisition, select Horiz/Acq
> Run/Stop and click Run/Stop or push
the RUN/STOP button on the Auxiliary
Front Panel.
2. To stop the acquisition, click Run/Stop
again or push the RUN/STOP button.
3. To take a single acquisition, click Single
Sequence or push the Single button.
Acquisition
60 DPO70000SX Series User

Tektronix DPO77002SX Specifications

General

Brand	Tektronix
Model	DPO77002SX
Category	Test Equipment
Language	English