Toyota 22R-E User Manual

CONTINUED FROM PAGE EG1–138
OK
Check wiring between oxygen
sensor and ECM connector.
(2) Check operation of oxygen sensor.
Check volume air flow meter.
Check cold start injector.*
Replace oxygen sensor.
*Rich malfunction only.
Check fuel pressure.
Repair or replace.
Repair or replace.
Repair or replace.
Repair or replace.
Check injector.
System normal.
Repair wiring.
BAD
BAD
BAD
BAD
BAD
BAD
–ENGINE MFI SYSTEM
EG1–139

Toyota 22R-E Specifications

General

Displacement	2.4 L (2366 cc)
Fuel System	Electronic Fuel Injection (EFI)
Compression Ratio	9.0:1
Torque	142 lb⋅ft (193 N⋅m) at 3, 400 rpm
Block Material	Cast Iron
Head Material	Aluminum
Engine Type	Inline-4
Bore x Stroke	92 mm x 89 mm (3.62 in x 3.50 in)
Valvetrain	SOHC, 2 valves per cylinder
Power Output	112 hp (84 kW) at 4, 600 rpm