22. REMOVE N0.1 TIMING BELT COVER
HINT (When re–using timing belt): Before removing
the timing belt cover, using the crankshaft pulley bolt,
turn the crankshaft and align the installation mark of
the timing belt with the end of the timing belt cover.
24. REMOVE TIMING BELT
HINT (When re–using timing belt): If the installation
marks have disappeared, place a new installation mark
on the timing belt to the match the dot mark of the
crankshaft timing pulley.
(d) Using SST, remove the pulley.
SST 09213–31021
23. REMOVE TIMING BELT GUIDE
Remove the three bolts, timing belt cover and gasket.
–ENGINE ENGINE MECHANICAL
EG2–37
To Next Page
Loading...
Need help?
General
