INJECTORS REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL
OF BATTERY
2. DRAIN COOLANT
3. REMOVE CHAMBER WITH THROTTLE BODY
(See steps 9 to 15 on pages EG1–16,17)
4. DISCONNECT WIRES
(See step 17 page EG1–17)
INJECTORS INSPECTION
1. TEST INJECTION OF INJECTOR
CAUTION: Keep injector clear of sparks during the test.
(a) Disconnect the fuel hose from the fuel filter outlet.
(b) Connect SST (Union) to the fuel filter outlet.
SST 09268–41045 (90405–09015)
HINT: Use the vehicle’s fuel filter.
6. REMOVE DELIVERY PIPE WITH INJECTORS
Remove two bolts and then remove the delivery pipe
with the injectors.
5. DISCONNECT FUEL HOSE FROM DELIVERY PIPE
Remove the bolt, union bolt and two gaskets.
–ENGINE MFI SYSTEM
EG1–188
To Next Page
Loading...
Need help?
General
