CHASSIS
19. INSPECT STEERING LINKAGE
(a) Check the steering wheel freeplay.
Maximum:
30 mm (1.18 in.)
With the vehicle stopped and pointed straight ahead,
rock the steering wheel gently back and forth with
light finger pressure.
If incorrect, adjust or repair.
(b) Check the brake drum for scoring or wear.
Maximum drum inside diameter:
2WD 256.0 mm (10.079 in.)
4WD 297.0 mm (11.693 in.)
(c) Clean the brake parts with a damp cloth.
NOTICE: Do not use compressed air to clean the brake
parts.
18. INSPECT REAR BRAKE LININGS AND DRUMS
(See BR section)
(a) Check the lining – to – drum contact condition and
lining wear.
Minimum lining thickness:
1.0 mm (0.0039 in.)
(c) Check the disc for runout.
Minimum disc runout:
Ex. C & C 0.09 mm (0.0035 in.)
C & C 0.12 mm (0.0047 in.)
–MAINTENANCE MAINTENANCE OPERATIONS
MA–14
To Next Page
Loading...
Need help?
General
