Triumph Speed Triple Service Manual

Crankshaft, Connecting Rods and Pistons
Crankcase Breather
3.
In both cases, the hose is retained by means of a
spring-clip and protrudes into the sump as shown
The upper crankcase is fitted with a labyrinth type
below.
breather system, which requires no maintenance.
However, when assembling the crankcases, ensure
that the breather hose is not damaged and is securely
fitted to the breather as follows:
1. If the hose is 220 mm in length, the hose should
be pushed
half-way on to the breather outlet.
cdde \\ \\ \-
2.
If the hose is 240 mm in length, the hose should
be pushed
fully on to the breather outlet.
cddd
Sewice Manual - Speed Triple

Triumph Speed Triple Specifications

General

Transmission	6-speed
Engine Type	Liquid-cooled, 12-valve, DOHC, in-line 3-cylinder
Front Suspension	Öhlins 43mm NIX30 upside down forks, adjustable compression, rebound and preload
Rear Suspension	Öhlins monoshock, adjustable compression, rebound and preload
Front Brakes	twin 320mm floating discs
Rear Brakes	Brembo single piston caliper, 220mm disc
Fuel Tank Capacity	15.5 litres