113
Direct station selection keys
Apart from line keys, the administrator can also configure direct station selection
(DSS) keys. You can use a DSS key to call an internal subscriber directly, pick
up calls for this subscriber or forward calls directly to the subscriber.
Calling a subscriber directly
You cannot use DSS if the user is on another call (flashing LED).
Calling from the idle menu
Press the relevant DSS key. The key lights up and a connection is established.
Consultation with the DSS subscriber
Prerequisite: You are conducting a call.
Press the relevant DSS key for the consultation. The key lights up and a connec-
tion is established. If the subscriber answers, you can toggle, transfer the first
call or initiate a conference.
Call pickup
You can pick up calls for the DSS subscriber. If a call is waiting on their line, the
LED flashes.
Indirect pickup
Prerequisite: The auto-answer function is deactivated page 86.
Press the DSS key. The call is routed to your primary line and rings.
^ or : Lift the handset or press the : key. You are connected with the other party.
DSS 1
_
The administrator can configure the DSS key so that the connection is also
established when the DSS subscriber has activated do-not-disturb or call
forwarding.
The administrator has configured the DSS key for consultation.
DSS 1
_
If the administrator has configured transfer instead of consultation, you
can only transfer the current call to the DSS subscriber.
DSS 1
£
To Next Page
Loading...
Need help?
General