Unify CP200 User Manual

160
Web interface (WBM)
General
You can configure a number of settings for your phone via the WBM interface. Communication is
via a secure HTTPS connection. Access to the
WBM interface must be activated by your admin-
istrator.
Launching the web interface
To launch the interface, open a web browser and enter the following:
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
or
https://[Name of the phone]
[Name of the phone] that was assigned by the administrator.
Administrator settings
This area lets you configure settings for administering your phone and the network environment.
Access to the Administrator settings is protected by the admin password. For further information,
consult your administrator or refer to the administration manual.
For more information about the IP address, the WBM interface address and how to connect
the telephone to the network, refer to the section entitled "Network information"
 page 147.
You might receive a certificate notification from the browser. Follow the instructions to down-
load the certificate.
You will be prompted to configure a user password  page 122 the first time you call up the
WBM interface. You must log in with this password the next time you want to open the User
settings.

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English