Unify CP200 User Manual

142
Settings for "pattern"
If you selected "Pattern" as the ringer, you can make further settings for the pat-
tern melody and pattern sequence:
Select and confirm the option shown.
Select the required pattern melody
[
1
]
between 1 and 8 (e. g. 4). You will immedi-
ately hear the corresponding Ringer melody. Confirm the selected Ringer melo-
dy.
Select and confirm the option shown.
Select the required Ringer sequence between 1 and 6 (e.g. 2). You immediately
hear the set Ringer melody with the selected Ringer sequence. Confirm the se
-
lected setting.
Select and confirm the option shown.
Tone and indication with an unsecured voice
connection
Use this option to activate an alerting tone that you hear when a secure voice
connection with the party you are currently talking to ceases to be secure. The
message "Nonsecure connection" also appears.
z You can also configure this setting via the WEB interface  page 160.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
Ringer melody
4
Ringer sequence
2
Save & exit l
ñ
Secure connection setup is the preference set by your administrator.
User
Configuration
Connected calls
Secure call alert = No
Yes
Save & exit

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English