Unify CP200 User Manual

114
Rejecting a call
Press the DSS key. The call is routed to your primary line and rings.
Select and confirm the option shown in the pop-up menu.
The caller hears a busy signal.
Direct pickup
Prerequisite: The auto-answer function is activated  page 86.
Press the DSS key. The call is routed to your primary line and you are immedi-
ately connected with the other party via speakerphone.
Deflecting a call to a DSS subscriber
Prerequisite: The deflect function must be approved for DSS keys. For informa-
tion on the current setting, see  page 71.
If you receive a call on one of your lines, you can immediately deflect it to the
DSS subscriber.
Your phone rings and a line key flashes.
Press the relevant DSS key. The call is deflected to the DSS subscriber. If the
DSS subscriber does not answer, you can pick up the call by pressing the DSS
key.
LED display on DSS keys
ñ
The administrator must activate the reject option for DSS keys and auto-
answer must be deactivated
 page 86.
DSS 1
_
Reject f
DSS 1
_
DSS 1
£
DSS 1
£
DSS key Meaning
_
Off: The phone is in idle mode.
£
Flashing green: You can accept a call for the DSS subscriber via
the key. The call is routed to your primary line when the call is ac
-
cepted.
¤
Lighting green: The line is busy. Provided that second call is ac-
tivated, you can still reach the DSS subscriber via the key. It can
accept your call as a second call.

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English