To Next Page

To Previous Page

Immediate dialing

Immediate dialling is deactivated by default. For this reason after entering the

number you must either confirm the "Dial" option or wait until the dial delay ex

pires to set up the connection. If Immediate dialling is configured, your call is

automatically dialed as soon as the string entered matches an entry in the dial

plan.

Activating or deactivating immediate dialing

z You can also configure this setting via the WEB interface  page 160.

@ Press the key shown.

Select and confirm the option shown.

if nec. j Enter and confirm the User password.

Select and confirm the option shown.

Confirm the option shown.

Dialing using the hot or warm line function

If you lift the phone's handset or press the loudspeaker key,

• immediately in the case of a hot line or

• after a defined period of time in the case of a warm line,

• a number specified by the administrator is dialed.

Examples:

• The phone in the elevator immediately dials the reception number.

• The phone at a patient's bed dials the ward number after one minute, for ex-

ample, if no other number is dialed.

Immediate dialling should only be activated if your administrator has con-

figured and approved a dial plan.

User

Configuration

Outgoing calls

Immediate dialling = No f

Yes l

Save & exit l

Your administrator can configure a hot line or warm line for your phone.

Unify CP200 User Manual

Other manuals for Unify CP200