Unify CP200 User Manual

48
Call forwarding
Standard call forwarding
You can forward calls for your phone to another phone. You can also change,
activate and deactivate call forwarding during a call.
Three forwarding conditions can be programmed in the forwarding menu:
• Uncond’l
•On Busy
• On No reply (xs)
Because of its direct impact, "Uncond’l" call forwarding has the highest priority
followed by "No reply (xs)" and then "Busy".
If active, "Uncond’l" call forwarding is indicated on the display when the phone
is idle.
Forwarded calls can be logged in a call list (see  page 23).
The Forwarding menu offers you three types of call forwarding.
 Uncond’l Destination phone number
 Busy Destination phone number
 No reply (xs) Destination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, a Destination could then be Destination 12345.
ñ
Depending on the settings made by the administrator, standard call for-
warding may be configured for the phone or alternatively a forwarding call
by type option that is supported by OpenScape Voice
 page 55.
The Forwarding function must be approved by the administrator.
On multi-line telephones ( page 106), you can only configure call for-
warding for the primary line.
Alternatively, call forwarding can be programmed on one or more keys with
a fixed destination and a predefined forwarding or call type
 page 66.

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English