Unify CP200 User Manual

74
Placing a call on hold
You can use this function to place an ongoing call on "Hold", for instance to pre-
vent the other party overhearing a conversation with a colleague in the same
room.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connection's context menu.
or
Ä Press the key shown. The key illuminates.
Retrieving a held call
Select and confirm the option shown in the connection's context menu.
or
Ç Press the illuminated key.
Using line keys
On multi-line telephones you can also use the line keys to place ongoing calls
on "Hold".
Press the corresponding line key. The line key LED starts flickering. The call is
now on hold.
Retrieving a held call:
Press the corresponding line key. The line key LED lights up. The call is re-
trieved.
Hold ? f
If you do not retrieve the held call after a defined time interval, a reminder
beep sounds three times and a prompt to retrieve the call or disconnect
appears on the display. The settings for this can be found on
 page 75
and  page 76.
Reconnect ? l
Line 1
_
Line 1
¤
The LED display  page 107indicates that the call is on "Hold" to other
multi-line telephones where this line is also configured. These phones can
then pick up the call.

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English