Wacker Neuson G 25 User Manual

wc_tx003611gb_FM10.fm
113
Working with Deep Sea Controller: DSE 7310
10.4 How to Reset the Maintenance Timer
Background The maintenance timer is preset to 500 hours. When the maintenance timer times
out, the genset controller sounds the audible alarm.
Procedure Perform the procedure below to reset the maintenance timer.
1. From the “Status” menu, press the right arrow button to reach the “Engine”
menu.
2. Using the up and down arrow buttons, navigate to the “Maintenance alarm 1”
screen.
3. Press the “Stop/Reset” button (a). The timer will return to 500 hours.
DEEP SEA ELECTRONICS
Alarm
Warning
Main Breaker Open
Low Speed Active
DSE
Alarm
Warning
Main Breaker Open
Low Speed Active
DSE
wc_gr011508
DEEP SEA ELECTRONICS
Alarm
Warning
Main Breaker Open
Low Speed Active
DSE
a
DSE 7310
DSE 7310
DSE 7310
DSE 7310

Wacker Neuson G 25 Specifications

General

Brand	Wacker Neuson
Model	G 25
Category	Portable Generator
Language	English