wc_tx003572gb_FM10.fm
48
Mobile Generator
Machine Setup
5.3 Grounding the Generator
Location
A ground connection is located at the customer connection terminal lugs.
Function
This ground connection is used for electrically grounding the generator when
necessary to comply with the National Electrical Code and other federal, state, and
local regulations. For grounding requirements in your area, consult with a qualified
electrician, electrical inspector, or local agency having jurisdiction over electrical
compliance.
■ If the generator is used at a construction site, there may be additional
regulations which must be observed.
■ In some areas, generators are required to be registered with local utility
companies.
To Next Page
Loading...
Need help?
General
