Xerox WorkCentre 3345 Service Manual

General Information
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
1-11
Introduction and Overview
The Phaser 3330 and WorkCentre 3335/3345 use a single-pass laser design, offering mono print
speeds of 35 to 42 ppm, and resolutions up to 1200 x 1200 dots-per-inch (dpi).
The Tray 1 is a 250-sheet multi purpose tray. The Bypass Tray is a 50 sheet tray that supports specialty
media, card stock, and envelopes. The Output Tray holds 150 sheets facedown.
The WorkCentre 3335/3345 combines a 1200 dpi scanner with the laser printer to provide copy, scan,
and print functions. Both models have a G3 Fax modem, Ethernet interface, and wireless capability to
provide networked copy, scan, and Fax functions.The WorkCentre 3335 model has an Automatic
Document Feeder (ADF), and the WorkCentre 3345 has a Duplex Automatic Document Feeder (DADF).
Technical Support Information
The Xerox Service Manual is the primary document used for repairing, maintaining, and
troubleshooting the printer. To ensure complete understanding of this product, participation in Xerox
Service Training is strongly recommended. To service this product, certification for this product is
required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc., go to:
• Xerox Global Service Net - https://www.xrxgsn.com/secure/main.p
For further technical support, contact your assigned Xerox Technical Support for this product.

Xerox WorkCentre 3345 Specifications

General

Brand	Xerox
Model	WorkCentre 3345
Category	All in One Printer
Language	English