Service Parts Disassembly
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
4-142
White Bar
Parts List 7.1A WorkCentre 3335 ADF
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section (page 4-3).
Note: The White Bar Plate has two springs beneath it. When removing the White Bar Plate, be
careful to not lose these springs.
2. Lift up the ADF, disconnect the White Bar Plate bosses and remove the White Bar Plate.
To Next Page
Loading...
Need help?
General
