Transmitter Operation
FM
OPERATION
DTMF
OPERATION
When using the optional MH-368SJS
DTMF
microphone,
you
can manually send out
DTMF tones for autopatch
or
repeater control purposes.
In
the FM mode, close the microphone's PTT switch, as usual. While holding in the PTT
switch, press the keys corresponding to the tones you wish to send. When you are finished,
after releasing the final
DTMF
key, you
may
release the PTT switch.
ARTSTM
(AUTO
RANGE TRANSPOND SYSTEM) OPERATION
The ARTS™ system uses
DCS
signaling to inform
you
when
you
and
another
ARTS-
equipped station are within communications range.
/. Press the
[FUNC] key, as needed, to recall Operating Function Row 3 [TON, DCS,
ART].
2.
Press the [C](ART) key to activate the ARTS feature (the "ART" icon will
appear
on
the display).
Your display will change to
"out
rng"
to indicate the beginning
of
ARTS operation.
Every
15
seconds, your radio will transmit a "polling" call to the other station. When
that station responds with its ARTS polling signal, your display will change to
"in
rng"
to
confirm his response.
3.
To
cancel ARTS operation, press the [C](ART) key again (the "ART" icon will disap-
pear from the LCD).
~
'
......
'...
The
ARTSfeature
offers a choice
ofbeep
options
to
alert you to the current
,
...
/>
iE!l
status
of
ARTS
operation. Check out
MENU
#09 (ARTS BEEP) on page
85.
<.:d-
/
CW
IDENTIFIER SETUP
The
ARTS feature includes a
CW
identifier. The radio can be instructed to send
"DE
(your
cal/sign)
K"
in
Morse code every ten minutes during ARTS operation.
To
program the
CW
IDer, use
MENU
#11
(ID), as described on page 86. And to activate the
CW
IDer, use
MENU
# I 0
(CW
10).
FT-JOO
MICRO
MOBILE
OPERATING
MANUAL
57
To Next Page
Loading...
